2019 Nitro Z17 - Belanger

2019 Nitro Z17

The quick and compact NITRO Z17 is a fiberglass bass boat thats easy to fish, easy to store and just right for anyone from the casual angler to the amateur tournament competitor. It shares many of the features of the larger Z Series boats, including our revolutionary NVT hull, a large, heavily insulated cooler, lockable rod storage, a Guardian livewell, roomy tackle storage and custom seating built in-house.

Features may include:

Comfort, Convenience & Peace Of Mind

• NMMA certified

• Flotation meets or exceeds NMMA & U.S. Coast Guard requirements

• EPA-compliant fuel system

• Non-skid mats bow & stern

• 2 drink holders

• 4 stainless steel, angled cleats flushed w/gunnels

• Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor

• 2 grab handles (1 at passenger, 1 at transom)

• Fire extinguisher

• Horn

• Paddle

Livewell Systems

• Aft 23-gal. (87 L) Guardian aerated livewell w/divider & timer

• 500 GPH (1,893 LPH) livewell recirculation/pump-out system

• 500 GPH (1,893 LPH) aerator/fill pump

• Rotomolded w/rounded corners

Trolling Motor

• Minn Kota Edge 12V, 55-lb. (24.95 kg) thrust, 45" (1.14 m) shaft foot-control trolling motor

Console

• NEW Lowrance HOOK2 4x flush-mounted fishfinder

• Single cable, no feedback rotary steering w/tilt

• Removable acrylic, tinted windscreen

• Ready to accept optional removable port console

• Custom-molded modular console w/2-tone gelcoat

• Veethree multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge

• Dash light dimmer

• Water-resistant switch panels

• LED courtesy light

• 12V outlet

• Room to flush-mount optional, exchanged 9" (22.9 cm) graph

Interior

• 32-sq.-ft. (3.0-sq.-m) bow deck for casting mobility w/lots of storage

• Bike seat w/pedestal

• Folding fishing seat w/composite frame

• Driver & passenger bucket seats w/molded-in storage below

• Trolling motor pedal recess for Minn Kota & MotorGuide trolling motors

• Port & starboard bow rod hold-down straps

• Molded-in drainage channels around bow storage compartments

• Oversized, lockable port & starboard bow rod lockers for rods up to 7' (2.13 m)

• Oversized lockable center bow storage locker w/lift assist & organizer for 4 rods up to 7' 6" (2.29 m)

• Step to bow deck w/42-qt. (39.8 L) insulated cooler

• Partner rod ramp w/rod handle organizer & hold-down strap

• Footrest w/non-skid mat under console(s)

• Step to aft deck w/polymer lid

• 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays

• Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup

• Insulated aluminum lids w/welded corners

• 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor

• Lockable compression latches

Performance

• NITRO Vortex Technology (NVT) hull for a smoother, drier ride

• Rapid Planing System (RPS) for quicker holeshots & maximized speed

• Rigging tube for organized wiring & abrasion resistance

• Stainless steel propeller